SFP Transceiver


View High Res Image
SFP-1GBT-05 (shown)

Bel’s RoHS-compliant transceiver module is able to access the physical layer IC (PHY) via I2C interface. Additionally, the device features Baseline Wander correction to recover data in a worst-case network environment, and an automatic medium-dependent interface crossover (auto-MDIX) feature. In 1000BASE-T and 100BASE-TX modes, the transmit data stream is scrambled to reduce radiated emissions and to ensure that there is no correlation between symbols in the data stream.

Supporting 10/100/1000 Mbps data-rate in excess of 100 meters (325 feet) reach over UTP Category 5/5e cables, the robust SFP-1GBT-05 transceiver module is ideally suited for implementing small form-factor Network Interface Cards (NICs) and uplinks. As such, it is highly appropriate for use in such high-density applications as LAN 1000BASE-T, switch-to-switch interfaces, switched backplanes, blade servers, gaming devices, and router/server interfaces.

Part Number Broadcom Chipset Applications Host Interface IEEE Spec Operating Temperature Cable Data Sheet
SFP-1GBT-05 BCM54616S 10/100/1000Base-T SGMII Compliant IEEE 802.3ab, u -40°C + 85°C Cat5/5e
(Note 1)
Data Sheet
SFP-1GBT-06 BCM54616S 1000Base-X to 1000Base-T GBIC Compliant IEEE 802.3ab -40°C + 85°C Cat5/5e
(Note 2)
Data Sheet
SFP-1GBT-09 BCM54616S 1000Base-X to 1000Base-T
10/100/1000Base-T
SyncE
GBIC Compliant
SMGII Compliant
IEEE 802.3ab, u -40°C + 85°C Cat5/5e
(Note 3)
Data Sheet

Note 1: 2 or 4 pair: 10Base-T Full or Half Duplex, 100Base-T Full or Half Duplex, 1000Base-T Full or Half Duplex
Note 2: 4 pair: 1000 Mbps
Note 3: Product default operation is GBIC Compliant for maximum compatibility, with I2C configuration SGMII and SyncE functionality may be selected.

RoHS Compliant